Trims & notes
• #5 moulded zip, 68 cm, with chin guard (centre front)
• Round drawcord 0.5 cm, ~150 cm + cord ends x2 (hem)
• Metal eyelets x2 (hem casing at CF)
• 1.5 cm woven elastic, ~50 cm (cuffs)
• 3 cm cotton twill tape, ~130 cm (hem casing)
• Woven label (inside back neck) + care label (left side seam)
• The two hem numbers are both real and both belong on the chart: 60 cm released is what the factory cuts and measures, 44 cm as worn is what the garment looks like. A factory given only the 44 will cut the hem narrow and the blouse disappears.
• Cut the funnel in one piece with its own facing. A collar seamed at the mouth folds on the seam, and at 480 GSM that seam is the thickest thing on the garment, sitting against the wearer's jaw.
• Put the welt pockets above the casing, not through it. A pocket mouth that crosses a drawcord channel stops the cord dead and the hem only gathers on one side of it.
• Double-faced fleece has no wrong side, which is the point, but it also means every raw edge shows from the inside. Overlock in a matched thread, not white.
• At 480 GSM the shoulder drop does the work the collar cannot: at a natural shoulder this fabric stands away from the neck and the funnel leans backwards.