Cyber-Y2K · oversized, straight, hangs away from the body
Oversized Panelled Sport Jersey
PixelSideline
160 GSM recycled poly interlock with mesh side panels, 62 cm chest, 72 cm length, ribbed v-insert crew, short raglan-cut sleeve, contrast panel seams
FRONT
BACK
Free vector flat
No account
The drawing above, front and back, as an editable vector — open it in Illustrator, Figma or Affinity and put your own graphics on it. Measurements aren't on the flat; they're in the tech pack.
The vector flat above is free and always will be. The tech pack — graded measurements, tolerances, fabric weights and construction — is the paid part.
Starting spec — make a sample before you order in bulk.
New to tech packs? Read how to make one, step by step →Fabric
160
GSM · Midweight · range 140–185
Recycled poly interlock — 100% recycled polyester. Moisture-wicking, matte face; must take sublimation without ghosting on the reverse
Trim: Poly mesh (side panels and underarm) · 100% polyester · 120 GSM
What does GSM mean? Read the fabric weight guide →How it's made
Shoulder
Drop shoulder, 5 cm drop — Flatlock, 6 mm
Neck
1x1 rib crew with a stitched v-insert at centre front · rib height: 2.5 cm · topstitch: Cover-stitch 0.6 cm, back-neck tape
Panelling
Contrast mesh side panels, 9 cm wide at the chest tapering to 7 cm at the hem, running from the underarm to the hem on both sides
Sleeve hem
2.5 cm turned hem, cover-stitched
Body hem
3 cm turned hem, cover-stitched. Straight; 6 cm bar-tacked side vents at the hem
Side seams
Flatlock through the mesh panel, 6 mm
Stitch density spi
12 stitches per inch
Size chart
Garment laid flat · M is the sample size
Measure
XS
S
M
L
XL
XXL
A
Body length (HPS to hem)
± 1 cm
69
70.5
72
73.5
75
76.5
B
Chest width (1 cm below armhole)
± 1 cm
56
59
62
65
68
71
C
Hem width
± 1 cm
56
59
62
65
68
71
D
Across shoulder (seam to seam)
± 1 cm
50
52
54
56
58
60
E
Sleeve length (from shoulder seam)
± 0.5 cm
22
23
24
25
26
27
F
Sleeve opening (flat)
± 0.5 cm
18.5
19
20
21
21.5
22
G
Armhole (straight)
± 0.5 cm
25
26
27
28
29
30
H
Neck width (seam to seam)
± 0.5 cm
18
18.5
19
19.5
20
20.5
I
Front neck drop (HPS)
± 0.3 cm
8.5
8.5
9
9.5
9.5
10
J
Back neck drop (HPS)
± 0.3 cm
2.5
2.5
2.5
2.5
2.5
2.5
P
Mesh side panel width (at chest)
± 0.5 cm
9
9
9
9
9
9
Colourways
Pitch White / Black panel
#F2F2EF
Cobalt / Navy panel
#2F55A4
Acid Lime / Black panel
#C6E84B
Trims & notes
• 1x1 rib (neck)
• Back-neck tape 1.2 cm
• Printed neck label (a woven label scratches under a jersey)
• Care/content label
• Sublimation prints on polyester only, and only on light grounds. If you want a dark jersey with a light print, you are printing, not sublimating, and the cost and the hand both change — decide before you quote.
• The mesh panel must be the same shrinkage as the body or the side seam ropes after washing. Ask for a wash test on the made-up panel, not on the two fabrics separately.
• Numbers and names are a separate cost line. Get the factory to quote blank and decorated separately so you can see what the decoration actually costs.
• Front print area: 28 x 22 cm, clear of the mesh panels on both sides.
More templates like this
© 2026 LineDrop · Starting specs — always make a sample first.